Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IRstuff on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

DIN17155 is replaced with which standart for pipes? 1

Status
Not open for further replies.
pvesseleng

pvesseleng

Mechanical
Dec 19, 2004
51

DIN17155 is replaced with which standart for pipes?

ulyssess (Materials) 11 Jun 08 write
For plates:
15Mo3 was the designation in DIN 17155, replaced in 1993 by EN 10028-2. At the same time, the name was changed to 16Mo3, maintaining the steel number 1.5415.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
DIN 17155 did not define pipes, only plates and strips for elevated temperatures. Seamless tubes for pressure purposes were defined in DIN 17175, meanwhile replaced by EN 10216. Welded steel tubes for pressure purposes are defined in EN 10217.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Xk333
  • Locked
  • Question
ERW/EFW pipes 1
Replies
6
Views
444
weldstan
weldstan
rollingcloud
  • Locked
  • Question
Is heat scale cosmetic only? 1
Replies
5
Views
1K
mfgenggear
mfgenggear
efulm4444
  • Question
6061-T6 in contact with CF8M Corrosion Concerns
Replies
3
Views
5K
WKTaylor
WKTaylor
PRjuventus
  • Locked
  • Question
Interpreting of "thickness is the minimum dimension of the heaviest section"
Replies
0
Views
1K
PRjuventus
PRjuventus
mthausif123
  • Locked
  • Question
Is CS a suitable material for cooling water with high chloride content?
Replies
7
Views
1K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top Bottom