Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Steels= Russian equivalent to ASTM and SA materials

Status
Not open for further replies.
carthago

carthago

Mechanical
Joined
Jun 13, 2003
Messages
145
Location
NL
..Could someone help with info., software, tables, site, etc giving equivalence of russian materials for pressure vessels and piping (plates piping,forgings and bolting...filler materials)

I am interested in ASTM and or European materials.

By equivalent I mean mechanical: strength, resilience( and chemical composition).

Which type of certification do they require for materials in the Russian Federation ?
 
Sort by date Sort by votes
Go to this web site and see what they have. Several of the lite books may help you but you may need to purchase the entire book (if applicable). One that comes to mind is the Black Book Eurolite.

 
Upvote 0 Downvote
Do you a have a specific Casti book in mind ??

...I have almost all the Casti books... there is no big information about Russian steels or their ASTM equivalent !!
 
Upvote 0 Downvote
DEARS,
I do ask for STEEL 37 ,STEEL 44 &STEEL 52
And thier EQUivalents (ISO or yours)

Eng.Shawkat EL Banna

 
Upvote 0 Downvote
None of my comparison references have any listing for Steel XX under Gost/Goct. I'll have to admit that they are by no means complete.

I think you are looking for ST 37-x; ST 44-x; ST 52-x which are steels that fall under DIN standards based on the product forms. These steels are mainly Carbon Steels used for all product forms and made everywhere.

If you do a Google search, say on ST 44 you will get more information than you can handle
 
Upvote 0 Downvote
you can find this in the "Stahlschlussel" (Key of Steels)
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
Wickerfields
  • Locked
  • Question Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
1K
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Muza33
  • Locked
  • Question Question
SA 537 CL 2 Welding electrode
Replies
3
Views
1K
DVWE
DVWE
Rubje
  • Locked
  • Question Question
ASTM A7, A30, A70
Replies
1
Views
1K
Dhurjati Sen
Dhurjati Sen

Part and Inventory Search

Sponsor

Back
Top