Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ISO 15156 Mole Fraction of H2S 1
- Thread starter bmoorthy
- Start date
-
1
- #2
1) To calculate the mole fraction, the total number of moles of all the constituents in the system needs to be known. It is a dimensionless concentration term. However, you have already obtained a dimensionless concentration for the H2S so, effectively, you would not need to know its mole fraction.
2) 10000 ppm (on an assumed volumetric basis) = 1% = 0.01
100 MPa * 0.01 = 1 MPa
Steve Jones
Materials & Corrosion Engineer
2) 10000 ppm (on an assumed volumetric basis) = 1% = 0.01
100 MPa * 0.01 = 1 MPa
Steve Jones
Materials & Corrosion Engineer
- Status
Similar threads
- Question
- Locked
- Question
