Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Which grade of stainless for Beer Bung?
- Thread starter metman
- Start date
EdStainless
Materials
316L is the most common grade for these 'critical' fluid applications.
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
- Thread starter
- #5
My friend isn't too sure about this advice coming from beer drinkers but we'll hazard it since ya'll still be liv'n-n-kick'n.
unclesyd: stamped on it? I'm checking to see if one leg is a wee bit long. Surely a serious beer drinker would not jest about such a "critical" thing?
TVP: Talk about yer apprapo smiley!
Friend bought a S.S. disc from McMaster-Carr so guess I got a leetle lathe job. Maybe it'll barter for a sample.
unclesyd: stamped on it? I'm checking to see if one leg is a wee bit long. Surely a serious beer drinker would not jest about such a "critical" thing?
TVP: Talk about yer apprapo smiley!
Friend bought a S.S. disc from McMaster-Carr so guess I got a leetle lathe job. Maybe it'll barter for a sample.
- Status
Similar threads
- Locked
- Question
- Locked
- Question