SperlingPE
Structural
Looking for Butler Manufacturing Company Foundation Design and Construction Manual, by Buettner, Fisher, and Manske.
Does anyone know of where I can obtain a copy?
Does anyone know of where I can obtain a copy?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Metal Building Foundation Design
- Thread starter SperlingPE
- Start date
- Status
- Thread starter
- #3
SperlingPE
Structural
Tried at Butler. No response. Couldn't find it on the web site. Any other sources?
I got a copy of it 3 years ago and had to call Butler and talk to the corporate office. I don't have the number I called anymore. The office address on the back cover is as follows:
Butler Manufacturing Company
BMA Tower - Penn Valley Park
kansas City, Missouri 64141
I would try to get a phone number for this address and talk to them.
Butler Manufacturing Company
BMA Tower - Penn Valley Park
kansas City, Missouri 64141
I would try to get a phone number for this address and talk to them.
minorchord2000
Structural
I made similar inquiries and have a phone number in salt lake city:
Mr. Rick Strong
435.654.3988
cell 801.201.2731
I have not made the call yet, but when and if you do, double check that the manual you want is the one you are going to buy. I was quoted a very low cost of $15 which I questioned immediately.
Mr. Rick Strong
435.654.3988
cell 801.201.2731
I have not made the call yet, but when and if you do, double check that the manual you want is the one you are going to buy. I was quoted a very low cost of $15 which I questioned immediately.
- Status
Similar threads
- Question
- Question
