Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Chilled Water Pipe Insulation
- Thread starter robinxie
- Start date
Check out this website: and download their 3E insulation/heat transfer software.
Perry's or Marks' has this very problem in it so those are the references to use. Go home and read it sometime if you're having trouble falling asleep... Thanks!
Pete
P. J. (Pete) Chandler, PE
Mechanical, Piping, Thermal, Hydraulics
Processes Unlimited International, Inc.
Bakersfield, California USA
pjchandl@prou.com
Perry's or Marks' has this very problem in it so those are the references to use. Go home and read it sometime if you're having trouble falling asleep... Thanks!
Pete
P. J. (Pete) Chandler, PE
Mechanical, Piping, Thermal, Hydraulics
Processes Unlimited International, Inc.
Bakersfield, California USA
pjchandl@prou.com
- Thread starter
- #3
- Thread starter
- #5
Hi, Pete,
I could not find where to download the the software through the website Could you please guide me where I could find it?
Thank you very much.
Robin
I could not find where to download the the software through the website Could you please guide me where I could find it?
Thank you very much.
Robin
Oops, it's My bad! Try that. Thanks!
Pete
P. J. (Pete) Chandler, PE
Mechanical, Piping, Thermal, Hydraulics
Processes Unlimited International, Inc.
Bakersfield, California USA
pjchandl@prou.com
Pete
P. J. (Pete) Chandler, PE
Mechanical, Piping, Thermal, Hydraulics
Processes Unlimited International, Inc.
Bakersfield, California USA
pjchandl@prou.com
- Status
Similar threads
- Locked
- Question
- Question