Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM B369 UNS C96400

Status
Not open for further replies.
slghtrhs

slghtrhs

Mechanical
Joined
Jan 18, 2002
Messages
1
Location
US
I'm not metallurgist can someone tell me the effects of exceeding the lead (Pb) content in the material. The specification calls for a .01 max - The material in question has a reading of .023? The mechanical properties are fine (above the minimum requirements called out in the spec.), Weldability requirements are also fine.

OTT

 
Status
Not open for further replies.

Similar threads

Wickerfields
  • Locked
  • Question Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
1K
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
Rubje
  • Locked
  • Question Question
ASTM A7, A30, A70
Replies
1
Views
1K
Dhurjati Sen
Dhurjati Sen
MujtabaQA
  • Locked
  • Question Question
Who can explain about Thin-wall pipe as per ASTM standard
Replies
6
Views
2K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top