Microwave Notch Filter
Microwave Notch Filter
(OP)
Hi all,
I know how to make very selective 40 - 100 GHz notch filters, based on the dielectric waveguide.
Who may possibly need them?
I know how to make very selective 40 - 100 GHz notch filters, based on the dielectric waveguide.
Who may possibly need them?
RE: Microwave Notch Filter
Receiver and transmitter designers would be the primary group needed that component. They need to put a small connectorized rejection filter in-line to prevent overloading of the RF front end for a receiver, or place your unit in the output of their transmitter (requires medium to high (200 watt) power handling).
Hence, any company involved with receivers or transmitters. Primarily working for military customers.
You need marketing help and to write a paper and submit it to RF Design, or Microwaves & RF, or other magazines. I read these magazines every week, just to see who's made a new widget.
Give some more spec's without giving away your approach, i.e. rejection bandwidth and depth, VSWR data at distance outside your rejection frequency. Is the rejection bandwidth variable?
kch
RE: Microwave Notch Filter
RE: Microwave Notch Filter
about fourhundred bucks.
Plesae read FAQ240-1032
My WEB: <http://geocities.com/nbucska/>
RE: Microwave Notch Filter
RE: Microwave Notch Filter
kch