beastmaster
Marine/Ocean
Need info on proper engine alignment procedures for steel hull,diesel powered,twin screw,2400 hp,90 ft. range of towing vessel.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
engine alignment
- Thread starter beastmaster
- Start date
- Status
MikeHalloran
Mechanical
Measure, shim, jack, cut, fabricate, weld, whatever it takes, recurse. What else do you need to know?
Mike Halloran
Pembroke Pines, FL, USA
Mike Halloran
Pembroke Pines, FL, USA
Contact the engine maker. Typically they will have detailed written proceedures, specific to your engine model, foundation, and engine mount type.
Proceedures will also be a function of the technology available locally, laser, bearing jacks, etc..
Some major makers, have dedicated services and teams for alignment support.
Rgds,
RKK
Proceedures will also be a function of the technology available locally, laser, bearing jacks, etc..
Some major makers, have dedicated services and teams for alignment support.
Rgds,
RKK
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question