Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Design software

Status
Not open for further replies.

albatross

New member
Joined
Apr 8, 2000
Messages
2
Location
US
I am always looking for affordable aircraft design software,such as John Roncz's spreadsheet programs, but maybe a little more sophisticated. Something that will give reasonably accurate performance prediction, drag coeff. etc., but without the usual 'now make a guess at the flat plate drag area and add fudge-factor-k ...'.<br><br>Help is appreciated. I am always willing to talk to other designers, too, to share information.<br>Peter <p>Peter Thomas<br><a href=mailto:irondack@aol.com>irondack@aol.com</a><br><a href= > </a><br>"Aeronautical engineering is educated guessing, worked out to the n'th degree..."
 
I have collected more that 1.500 software application in Aircraft Design during the past 15 years . I may help a lot of aircraft designer and builder . I am Italian Aeronautical and Astronautical Engineer.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top