daveykbelgium
Mechanical
Can anybody guide me on whether it is possible to level and align a number of modules very accurately - say 0.05mm - using a collimator or auto collimator.
Many thanks
Dave
Many thanks
Dave
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Collimators and auto-collimators for levelling and aligning
- Thread starter daveykbelgium
- Start date
- Status
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question