Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Yield strength ASTM A106 Gr B

Status
Not open for further replies.
2ndchild

2ndchild

Petroleum
Joined
Aug 20, 2005
Messages
31
Location
US
hi,
The Yield strength of the ASME A106 Gr B is 240MPa (35ksi)at 120C (250F)???
regards
 
Sort by date Sort by votes
31.5 Ksi at 250 deg F (ASME Section II, Part D, Table Y-1).
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Wickerfields
  • Locked
  • Question Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
1K
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
APIpipeWholesaler
  • Locked
  • Question Question
ASTM A252 Gr 3 with 50 KSI min yield
Replies
3
Views
1K
APIpipeWholesaler
APIpipeWholesaler
Rubje
  • Locked
  • Question Question
ASTM A7, A30, A70
Replies
1
Views
1K
Dhurjati Sen
Dhurjati Sen

Part and Inventory Search

Sponsor

Back
Top