Having seen an adapter for 2"x3" rectangular downspout to 4" or 6" round PVC draintile, I can't find a web site or a manufacture for the item. Any source help or website is needed. Need info for current project. <p> <br><a href=mailto:steveo@ix.netcom.com>steveo@ix.netcom.com</a><br><a href= > </a><br>
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Gutter downspout adapter 1
- Thread starter steveo
- Start date
-
1
- #2
Be sure to check <A HREF=" TARGET="_new"> or <A HREF=" TARGET="_new"> . They may have what you are seeking...
- Staff
- #3
One source I know is ; Jay R. Smith Mfg. Co.<br>
Box 3237 Montgomery, AL 36109, 205-277-8520 Downspout Boots<br>
1785 series 4x3 rectangular<br>
1786 series 5x4 "<br>
1787 series 4" round<br>
Drawing is dated 1970, so no URL or Email.<br>
(All cast iron)<br>
By the way, I rarely post in the forums. We do not promote or favor one solution over another as we are independent. However, as a retired "Civil" guy I had this little pearl here at my fingertips.
<br>
Good luck and hope this helps. <br>
Jimbo
Box 3237 Montgomery, AL 36109, 205-277-8520 Downspout Boots<br>
1785 series 4x3 rectangular<br>
1786 series 5x4 "<br>
1787 series 4" round<br>
Drawing is dated 1970, so no URL or Email.<br>
(All cast iron)<br>
By the way, I rarely post in the forums. We do not promote or favor one solution over another as we are independent. However, as a retired "Civil" guy I had this little pearl here at my fingertips.
<br>
Good luck and hope this helps. <br>
Jimbo
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
