Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 650 Seismic Zone for Indonesia

Status
Not open for further replies.

sdz

Structural
Joined
Dec 19, 2001
Messages
587
Location
AU
I have to design some tanks for a site in Indonesia. The site is in Seismic Zone 3 from the Indonesian code. What would be the corresponding Seismic Zone Factor for seismic design to Appendix E?

Indonesia is divided into several zones with basic seismic coefficients as follows, for firm ground
Zone 1 - C=0.09, highest lateral load
Zone 2 - C=0.07
Zone 3 - C=0.05
Zone 4 - C=0.03
Zone 5 - C=0.01, lowest lateral load
 
Looks like no-one knows the answe to this one.
 
Indonesia local code zone 4 is different from UBC Zone 3.
So far, I have no information on this matter.
 
Dear sdz,
Trying to help you here.

AFAIK, Indonesia is divided to 6 seismic zone, which
very much different from API 650, from highest to lowest:
Zone 1: basic seismic coeff. for firm ground = 0.13
Zone 2: basic seismic coeff. for firm ground = 0.09
Zone 3: basic seismic coeff. for firm ground = 0.07
Zone 4: basic seismic coeff. for firm ground = 0.05
Zone 5: basic seismic coeff. for firm ground = 0.03
Zone 6: basic seismic coeff. for firm ground = nil

Most recent example, Nabire earthquake, is believed to be in Zone 1.

Hope this might help you.
Warm regars,

Ronald H. Harahap
PT Wijaya Pura
htt://
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top