Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ZUKEN 2
- Thread starter CAD2015
- Start date
-
2
- #2
JohnRBaker
Mechanical
Since you're posting this in a Siemens NX forum, perhaps it would be best to use the Harness Design tools from Mentor Graphics:
I say this because Mentor Graphics has been recently acquired by Siemens PLM Software and work is underway to provide a very high degree of integration between the Mentor Graphics suite of products and applications and the MCAD products of Siemens, such as NX.
Now it is true that Siemens NX is a 'Open' system and that it's possible to interface Zuken tools with NX, but long term, the preferred route to go will be use the Mentor Graphics ECAD product sets wherever possible when it comes to the design of integrated mechanical/electrical, or 'Mechatronic', systems.
John R. Baker, P.E. (ret)
EX-Product 'Evangelist'
Irvine, CA
Siemens PLM:
UG/NX Museum:
The secret of life is not finding someone to live with
It's finding someone you can't live without
I say this because Mentor Graphics has been recently acquired by Siemens PLM Software and work is underway to provide a very high degree of integration between the Mentor Graphics suite of products and applications and the MCAD products of Siemens, such as NX.
Now it is true that Siemens NX is a 'Open' system and that it's possible to interface Zuken tools with NX, but long term, the preferred route to go will be use the Mentor Graphics ECAD product sets wherever possible when it comes to the design of integrated mechanical/electrical, or 'Mechatronic', systems.
John R. Baker, P.E. (ret)
EX-Product 'Evangelist'
Irvine, CA
Siemens PLM:
UG/NX Museum:
The secret of life is not finding someone to live with
It's finding someone you can't live without
- Status