Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
zinc anode testing
- Thread starter choib
- Start date
projacktowl
Materials
Depending on the size of the anode, put it with a silver/silver chloride reference cell in a seawater / 3% NaCl solution bath. Connect the anode to the negative terminal of a multimeter, and the reference cell to the positive. You should get readings between -980mV to -1050mV.
- Status
Similar threads
- Locked
- Question