Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Youngs modulus Ultra High strength Steel 1
- Thread starter ijzer
- Start date
the elastic modulus for each alloy system is relatively stable wrt alloying elements and heat treat condition....
that said STEELS: 29-30x10^6psi COPPERS:15-19x10^6psi ALUMINIUMS: 10-11x10^6psi MAGNESIUMS: 6-7x10^6psi
As temperature increases the modulus decreases...
for steel at 220C Im not sure that the modulus goes down all that much you may be able to use the lower end of the range above. say 27.5x10^6 psi....
nick
Nick
I love materials science!
that said STEELS: 29-30x10^6psi COPPERS:15-19x10^6psi ALUMINIUMS: 10-11x10^6psi MAGNESIUMS: 6-7x10^6psi
As temperature increases the modulus decreases...
for steel at 220C Im not sure that the modulus goes down all that much you may be able to use the lower end of the range above. say 27.5x10^6 psi....
nick
Nick
I love materials science!
-
1
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question