bigplc
Civil/Environmental
- Jan 26, 2005
- 21
CAN I XREF A TITLEBLOCK IN PAPERSPACE?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
XREF TITLE BLOCK AND NOTES IN PAPERSPACE
- Thread starter bigplc
- Start date
- Status
- Thread starter
- #3
Title blocks don't really belong inside viewports. I usually right-click a paper space tab (on the bottom of the screen), copy it to the end, then either use or erase and start over with new viewports using MView.
PS - All upper case messages are akin to SHOUTING....
PS - All upper case messages are akin to SHOUTING....
Actually, xref'd titleblocks can be very useful, if you update the date or project name in the titleblock drawing, all sheets are automatically updated. Just make sure your sheet numbers are individual pieces of text. Also, by definition and eXternal REFerence is a different file, so you can't reference the same file you're working in.
- Status
