Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

X-ray detector design

Status
Not open for further replies.
CarlPugh

CarlPugh

Electrical
Joined
Jul 16, 2002
Messages
142
Does anyone have any experience designing X-ray detectors?

X-ray intensity will be read out on a panel meter from 0 to some value. X-ray level will be fairly low.

Should a Geiger tube be used, a halogen Geiger tube, a scintillation detector or something else?

Has anyone used a halogen Geiger tube? If so what manufacture/type was used and what were the results?

Thanks
Carl Pugh
 
Status
Not open for further replies.

Similar threads

naseria1364
  • Locked
  • Question Question
sauna detector
Replies
3
Views
3K
waross
waross
Selva_51
  • Locked
  • Question Question
Earthing Mesh Design
Replies
1
Views
455
7anoter4
7anoter4
VLFit
  • Locked
  • Question Question
Low PD High Voltage Transformer Design
Replies
3
Views
514
Gr8blu
Gr8blu
Dvhez
  • Locked
  • Question Question
Should secondary protection consider xfmr inrush current?
Replies
9
Views
3K
waross
waross
Saptarshi Laha
  • Locked
  • Question Question
Cable harness design in the software Harnware(by TE connectivity)
Replies
1
Views
571
Gr8blu
Gr8blu

Part and Inventory Search

Sponsor

Back
Top