Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

X-ray detector design

Status
Not open for further replies.
CarlPugh

CarlPugh

Electrical
Jul 16, 2002
142
Does anyone have any experience designing X-ray detectors?

X-ray intensity will be read out on a panel meter from 0 to some value. X-ray level will be fairly low.

Should a Geiger tube be used, a halogen Geiger tube, a scintillation detector or something else?

Has anyone used a halogen Geiger tube? If so what manufacture/type was used and what were the results?

Thanks
Carl Pugh
 
Status
Not open for further replies.

Similar threads

naseria1364
  • Locked
  • Question
sauna detector 1
Replies
3
Views
3K
waross
waross
Selva_51
  • Locked
  • Question
Earthing Mesh Design 1
Replies
1
Views
301
7anoter4
7anoter4
VLFit
  • Locked
  • Question
Low PD High Voltage Transformer Design
Replies
3
Views
332
Gr8blu
Gr8blu
VLFit
  • Locked
  • Question
HV Capacitor Design Resource
Replies
1
Views
321
IRstuff
IRstuff
Saptarshi Laha
  • Locked
  • Question
Cable harness design in the software Harnware(by TE connectivity)
Replies
1
Views
419
Gr8blu
Gr8blu

Part and Inventory Search

Sponsor

Back
Top Bottom