Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

WWTP modelization on ASIM

Status
Not open for further replies.
pyjaman08

pyjaman08

Civil/Environmental
Joined
Jun 10, 2015
Messages
1
Location
FR
Hey guys,

I'm currently using ASIM for an internship in water treatment.

I am studying a virtual WWTP but my tutor asked me to calculate the Nash-Sutcliffe coefficient, and I really don't understand how to get the actual data as the WWTP does not exist in real life.
Would you have an idea of what I could do to calculate the coefficient ? I also use Biowin so if you prefer to answer me with Biowin examples I will understand too.

thanks for your help !
 
Status
Not open for further replies.

Similar threads

geotechguy1
  • Locked
  • Question Question
Co-seismic fire ignition at WTP and WWTP
Replies
2
Views
927
bimr
bimr
Hasibullah
  • Locked
  • Question Question
gpm sizing for WTP/WWTP Piping gallery
Replies
1
Views
859
bimr
bimr
ntandomansa
  • Locked
  • Question Question
Using a Larger Combination Air Valve on a Smaller Pump Mains
Replies
4
Views
893
NW_Wash_Eng
NW_Wash_Eng
ashtree
  • Locked
  • Question Question
PDT test on UF membranes
Replies
2
Views
515
ashtree
ashtree
ATLPipeEngineer
  • Locked
  • Question Question
Resources on Small Distribution Systems with VFD pumps and no distribution tank....
Replies
11
Views
1K
Pinwards
Pinwards

Part and Inventory Search

Sponsor

Back
Top