Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Write out IGES file

Status
Not open for further replies.
Fulmer

Fulmer

Mechanical
Joined
Nov 25, 2003
Messages
1
Location
US
I am trying to export a deformed 2D model from ANSYS to an IGES file. The model was built in UG and was solved yeilding a deflect part. I was curious to know if there were any macros out there that could take this deflected shape and write it out so it could be imported back into UG.

Thanks
 
Status
Not open for further replies.

Similar threads

md_salem
  • Locked
  • Question Question
how to write a parameter in APDL code inside workbench file ?
Replies
15
Views
3K
md_salem
md_salem
AndrewSkocz
  • Locked
  • Question Question
Ansys - Solving an input file using command line
Replies
3
Views
1K
NRP99
NRP99
Sayed Ghalleby
  • Locked
  • Question Question
ansys *.cbd file to abaqus
Replies
0
Views
458
Sayed Ghalleby
Sayed Ghalleby
andradesilva
  • Locked
  • Question Question
know to write maximum displacement to an external file in ANSYS Mechanical APDL
Replies
1
Views
350
NRP99
NRP99
md_salem
  • Locked
  • Question Question
how to extract mode shapes vectors from ANSYS WORKBENCH file ?
Replies
0
Views
521
md_salem
md_salem

Part and Inventory Search

Sponsor

Back
Top