Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wrap a surface around a sphere with I-DEAS 12

Status
Not open for further replies.
nikos73

nikos73

Mechanical
Joined
Jul 2, 2009
Messages
3
Location
GR
Hi! Does anyone know how to wrap a surface around a sphere with I-DEAS 12?
In particular i have a logo (surface) that i want to wrap it on a sphere.
Thank you in advance for your assistance
 
Sort by date Sort by votes
You could try using the "wrap curves" command. You would need to extract all of the edges from the logo surface, then attach them to the logo part. Select "wrap curves" and select the surface, followed by the curves on the next pick and finally select the sphere.
 
Upvote 0 Downvote
Thank you xtocobofc, but seems that does not work.
I have extract and attach the curves but at the final step it does not work. Also i am confused with the X-Y axis.
 
Upvote 0 Downvote
How about using Emboss. I do not know if it wrap all around surface worth a shot?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

bjlasota
  • Locked
  • Question Question
What's the latest and greatest I-DEAS to Solidworks converters?
Replies
4
Views
1K
CADPat
CADPat
Juan_Marcos
  • Locked
  • Question Question
Old version of I-DEAS 9.0?
Replies
2
Views
1K
Tornado220M
Tornado220M
engInfoAlt
  • Locked
  • Question Question
NX I-deas 6.5 - Access denied
Replies
7
Views
1K
I-DEAS
I-DEAS
swale2
  • Locked
  • Question Question
Open native ideas files in NX
Replies
1
Views
897
rothers
rothers
LYukon
  • Locked
  • Question Question
I-Deas 12 model file size
Replies
1
Views
1K
CADPat
CADPat

Part and Inventory Search

Sponsor

Back
Top