I searched and didn't find this problem discussed in the last couple years: I have wipeout boxes in paperspace. They mask the modelspace itmes behind certain text and other annotations created in paperspace. On sacreen, the wipeouts properly mask what is in modelspace behind. However, when plotting the layout, with "Plot Paperspace Last" box unchecked (per "Help" function suggestion), neither the preview nor the plot hides the modelspace items behind. Anyone have any suggestions? Using 2004. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
WIPEOUT DISPLAYS PROPERLY BUT WON'T PLOT
- Thread starter KurtSauer
- Start date
- Thread starter
- #4
Thansk to all. It does appear the my plotter (TechJet 720) does not support the raster plotting, at least as it is presently configured. I did try to reset the "sortents" variable (it was 127), to no avail. I then tried to plot to an HP750, and the plot came out fine. Have to upgrade the plotter one of these days! Thanks, again, for the info.
- Status
Similar threads
- OctavioMasomenos
- Autodesk: AutoCAD