Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

WIND ROSE DIAGRAM AND ORIENTATION OF RUNWAY

Status
Not open for further replies.

nedians

Civil/Environmental
Joined
Mar 8, 2001
Messages
28
Location
EU
Hello,
Kindly help me on the following:

1) If i have the wind data for daytime visual meteorological conditions, what steps should i flow in order to draw a wind rose diagram and then finding the orientation of runway(assuming magnetic north to be 10 degrees ).

2) Is there any free downloadable software which i can use to complete this project or can i use excel spread sheet for this.?

3) Is there any website related to this, which can provide the Basic information ?

4) If i want to make a Electronic Model for this can i do that?
 
I suggest that you should read one of the chapter on Airport configuration from the well known text book by R. Horonjeff , "Planning and design of airports". A portion of this chapter deals with the wind rose, and some examples.
I also assume that FAA and ICAO guidelines provide some info on the selection of the runway from wind rose diagram.

As far as using a software to create wind rose, try

Regards
 
In addition :
If you do not have access to the textbook, you may download airport related document from USACE
Select TM 5-803-7 Technical Manual on Airport and Heliport Planning Criteria.
Attachement 5 discusses about the use of wind rose, with charts, etc. Good and comprehensive chapter to read.

Hope this helps you along
 
hi
I need the diagrams & complete procedure of WIND ROSE method
in selecting runway direction
regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top