Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

WHY does penetrate target element in contact so high?

Status
Not open for further replies.
C.Amini

C.Amini

Mechanical
Joined
Oct 20, 2017
Messages
18
Location
IR
Hi guys
I am modeling movement of rigid ball under force on the plate.
the simulation is 2 step: ball impressed to the plate, second step: impressed ball moves along the plate and simultaneously it rolls. but in the end of second step ball full penetrate on the plate(so that some part of ball passes the bottom of plate).
description of contact: contact lgoritm:AUGMENTED Lagrange ,detection point:normal to target, behaviuor:bonded(initial),..
what can i do for it?
 
Status
Not open for further replies.

Similar threads

T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
6K
TOM1345
T
andradesilva
  • Locked
  • Question Question
How to change element type in ANSYS Workbench 2023 R1
Replies
1
Views
2K
SPDL310
SPDL310
struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
4K
struclearner
struclearner
LS_SMS
  • Locked
  • Question Question
Joint Reactions in Solution Combination
Replies
4
Views
1K
STpipe
STpipe
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X

Part and Inventory Search

Sponsor

Back
Top