chao_david
Electrical
For example, at 0% load, the oil pressure is 4.5 bar and at 100% load, the oil pressure is 3.7 bar.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Why does oil pressure drops when I increase the load on a diesel generator?
- Thread starter chao_david
- Start date
- Status
Compositepro
Chemical
The engine and oil temperatures are higher, so the oil viscosity drops.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question