Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why ABAQUS show different contour value with/without subroutine in 2D plane strain?

Status
Not open for further replies.
fenfam

fenfam

Materials
Joined
May 20, 2020
Messages
8
Location
CN
I simply tested a orthotropic x-tension in ABAQUS 2D plane strain with/without subroutine.
The first image groups showed I just inputed these parameters in material.
1_modulus_snhdoc.png
1_result_yvceoc.png


The second image groups showed I use a UMAT to input these parameters.
2_modulus_elhual.png
2_result_bgc6a0.png


Besides, I also updated the comparing zip files, which contained different inp files and subroutine fortran file.
I'm looking forward to any help, thanks.
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
Assistance with VUHARD Subroutine in Abaqus
Replies
3
Views
3K
FEA way
FEA way
I
  • Locked
  • Question Question
Abaqus subroutine
Replies
3
Views
3K
FEA way
FEA way
I
Abaqus Subroutine
Replies
4
Views
6K
FEA way
FEA way
C
  • Locked
  • Question Question
Generalised plane strain using Abaqus Explicit
Replies
1
Views
1K
FEA way
FEA way
K
  • Locked
  • Question Question
How to Directly Output Strain Values for Specific Node/Element Sets Without Writing an ODB File in Abaqus?
Replies
3
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top