Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What is Thermal Degradation of DEA? 1

Status
Not open for further replies.

27may2002

Chemical
Oct 9, 2003
4
Hi everybody,

I am going to design a Hot Oil system for our DEA reboiler of a stripper column in an NGL plant.To reduce circulatin rate of heating medium I am thinking to use HM with a high temp.However I am worried about thermal degradation of DEA due to high skin temp.(Bulk temp. of amine is 252F).
Does anyone knows what is the maximum recommended skin temp in a DEA reboiler?

Regards,

27may2002
 
Replies continue below

Recommended for you

bchoate
For alkanolamines the maximum recommended bulk temperature is 260 F. The maximum skin temperature is 300 - 325 F. Above 350 F all alkanolamines will thermally degrade. In addition a conservative heat flux for the reboiler of 8,000 btu/hr/sft is recommended by most authorities.
Bill Choate
 
50 psig saturated steam is the common reboiler heating source I've seen.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor