Nov 28, 2002 #1 ITBT Mechanical Oct 6, 2002 27 This test is meant for a low pressure vessel, at 150PSI. Can I use oil to do the test? Any help is appreciated. Thanks.
This test is meant for a low pressure vessel, at 150PSI. Can I use oil to do the test? Any help is appreciated. Thanks.
Dec 6, 2002 #2 PAN Mechanical Apr 25, 2001 549 You may use oil as test media. However, it is very difficult for repair the defect (hot work) after test. Upvote 0 Downvote
You may use oil as test media. However, it is very difficult for repair the defect (hot work) after test.
