J
jluhavalja
Guest
In Pro/E Wildfire 2.0 when you insert an object, in my case a bitmap into
the drawing, it resizes it automatically and seems to lose clarity. When you
double click on it to edit, you can see the original and the original
clarity. When finished, it goes right back to the blurry one. Any help
would be greatly appreciated. Thanks.
Jason
the drawing, it resizes it automatically and seems to lose clarity. When you
double click on it to edit, you can see the original and the original
clarity. When finished, it goes right back to the blurry one. Any help
would be greatly appreciated. Thanks.
Jason
