Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Weling inspection qualifications

Status
Not open for further replies.

sree60

Mechanical
Mar 9, 2005
50
Members

I would like to have inputs on the following related to NDE qualification:

As per contracts in one of our Job EN473VT Level 3 inspectors are reqquired. We have AWS CWI and CSWIP 3.1 inspectors. Are they equivalent to EN qualification?
If so are there any documents to support this/

Thanks

Sree 60
 
Replies continue below

Recommended for you

No, they are not equivalent.

The EN473 is a European document very similar to the American ASNT-TC-1A except it is required rather than suggested.

The requirements for a CWI are close to that of a Level II in EN473, but substantially below a Level III. The problem is it is difficult (and $$$) to get an EN473 Certification in the US.

You can purchase the EN473 standard and verify, my 2000 version calls for 6 years experience and 3 years of college before testing for VT Level III. Plus you must find a European Notified Body or Registered Third Party Organization to issue the certification.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor