drodrig
Mechanical
- Mar 28, 2013
- 262
Hi there,
I want a cylinder made out of a plate which has to be welded to get closed.
There is a welding module in Catia. There are some videos in Youtube where one can see how they weld parts in an assembly.
In my case it is just a part. Within it.
How can I do this?
In reality, I just care about the drawing. I made the cuts for the welding preparation. In the Drafting module I can create the welding symbol in the top view. But I have no idea how to show it in the front view.
Any ideas?
Attached some captures
I want a cylinder made out of a plate which has to be welded to get closed.
There is a welding module in Catia. There are some videos in Youtube where one can see how they weld parts in an assembly.
In my case it is just a part. Within it.
How can I do this?
In reality, I just care about the drawing. I made the cuts for the welding preparation. In the Drafting module I can create the welding symbol in the top view. But I have no idea how to show it in the front view.
Any ideas?
Attached some captures
https://files.engineering.com/getfile.aspx?folder=979309b7-9ffa-4c56-acfe-6118f4143ee8&file=iso2.jpg