Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Welding opf MP35N
- Thread starter roozle
- Start date
Yes it can. The web site below by Carpenter has all of the information you need regarding weldability of MP35N material;
EdStainless
Materials
Yes, but....
If you are using product in the 'cold worked & aged' condition you will not reach the same mechaical proerties in the welds (or HAZ). Depedning on the service and such you need to be careful where in the process sequence you weld with respect to cold working and heat treatments.
= = = = = = = = = = = = = = = = = = = =
Corrosion, every where, all the time.
Manage it or it will manage you.
If you are using product in the 'cold worked & aged' condition you will not reach the same mechaical proerties in the welds (or HAZ). Depedning on the service and such you need to be careful where in the process sequence you weld with respect to cold working and heat treatments.
= = = = = = = = = = = = = = = = = = = =
Corrosion, every where, all the time.
Manage it or it will manage you.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question