Does anyone have experience or information on hot-tapping of natural gas piping? I'm specifically looking at an application that involves installing a welded branch connection (ie, welding on the pressurized gas pipe, then hole-sawing through an open ball valve).
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Welded Hot Tap of Natural Gas Piping
- Thread starter KenRad
- Start date
while i have not personnally accomplished a hot tap installation, they are frequently accomplished on many various fluid systems (gas, water ,steam, etc.) throughout the world.
it is important to have qualified individuals conducting the work using proper equipment to ensure safety practices and procedures are adhered to.
try investigating the following website for further information:
good luck!
-pmover
it is important to have qualified individuals conducting the work using proper equipment to ensure safety practices and procedures are adhered to.
try investigating the following website for further information:
good luck!
-pmover
- Status
Similar threads
- Locked
- Question
- Locked
- Question
