Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Waterproof connector 30A

Status
Not open for further replies.

Moonwalker031

Electrical
Jun 5, 2010
33
I just bought this connector

***p://
It says 30A rated but on arrival I found the contacts to be only 1mm diameter which I really doubt they can handle 30A.


So can someone point me to a similar connector (panel mount socket and cable mount screw on plug) that really can handle 30A at 12V load?
 
Replies continue below

Recommended for you

1mm diameter sounds like a size 20 pin -which is only rated for 3-5A.

For 30A, you probably want a size 8 pin - which is going to push you towards some less common/more pricy options.

These are quite nice, but demand a very different sort of budget.

A.
 
Looks like a connector made by Conxall, or maybe a copy.

Not really an aviation connector, more of a low-end commercial or consumer-grade marine/pleasure boating electronics connector.
 
I need these for a fishing boat for powering an electric winch. It is not going to be submerged but should be IP67 at least.

The Bucaneer 7000 series looks good and not too expensive. Thanks for the link.
 
I am a fan of Deutsch connectors, as they have provided very good service in a number of applications I work with, and lately seems a number come up on ebay come up from different sources,


This is overkill for your particular application, but there are lots of options with this line of products.

Hope that helps, MikeL
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor