Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Water Vapor Barrier Coating Formulation Assistance

Status
Not open for further replies.
polychemist

polychemist

Chemical
Oct 9, 2007
1
I need to develop a waterborne polymer plus additives water vapor barrier coating where transmission readings are approximately 70mg. per sq. meter per hour OR the lowest possible reading for a synthetic polymer formulation. Currently I am working with coated clays but my readings are not low enough. Any advice is appreciated. Thank you.
 
Status
Not open for further replies.

Similar threads

yazguli
  • Question
pipe coating
Replies
2
Views
2K
yazguli
yazguli
J
  • Locked
Need to paint carbon steel wire with fluorescent coating, either enamel, acrylic or other. What would be the best primer to use?
Replies
0
Views
654
Jon Davidson
J
Kidkolor
  • Locked
  • Question
Automotive coatings disection
Replies
0
Views
469
Kidkolor
Kidkolor
Rizzi94
  • Locked
  • Question
PVC coating primer adhesive alternative?
Replies
0
Views
421
Rizzi94
Rizzi94
YungPlantEng
  • Locked
  • Question
Any common industry uses for boride diffusion coatings beyond wear?
Replies
0
Views
447
YungPlantEng
YungPlantEng

Part and Inventory Search

Sponsor

Back
Top Bottom