I am looking for specific calculations and/or rules of thumb which will alow me to calculate the flow rate and pressure required for a water screen suitable for video presentation use. The screen needs to be 20m x 15m. I require any information about spray head design and water droplet size. I am aware of the various reccomended max flow rates through pipes, and can probably calculate total dynamic head. Can anyone help?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Water screen pump flow rates and pressure specifications
- Thread starter BritAl
- Start date
I am looking for specific calculations and/or rules of thumb which will alow me to calculate the flow rate and pressure required for a water screen suitable for video presentation use. The screen needs to be 10m*7m. I require any information about spray head design and water droplet size. I am aware of the various reccomended max flow rates through pipes, and can probably calculate total dynamic head. Can anyone help?
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Question