Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

water heating with steam 1

Status
Not open for further replies.

Prestz

Mechanical
Aug 12, 2008
12
Good Morning. Well, i am looking for any relation or equation about the heating of water using steam in contact and mix directly . Specifically i want to know heating rate or heating time in waters vessels at atmosferic pressure. I know it`s a termodinamics and mass transfer problem, but i need the help.
thanks
e.z.
 
Replies continue below

Recommended for you

Do enthalpy balance to get steam requirement. If you know the steam flowrate then you can calculate the time for rising the water temperature. If you know the time for rising water temperature then calculate steam flowrate.

This steam/water property calculator Steamtab will be very handy.

 
Thanks a Lot Mr. Quark for your time and help.
I will do the balance with enthalpy.
Gby.
e.z.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor