Onjal
Chemical
- Nov 4, 2004
- 1
I dipping photoconductors in water and removal 2000 bath tank to remove coating from photoconductors .Initially I can remove few codnuctors then water + removal bath become dirty . After that it stripped photoconductors but it becomes dirty .
I would like to monitor water in the bath tank so when it reach certain dirty contamination level it will dump by using automatic monitoring and dicharge valve open and discharge contaminated water and removal from tank (Bath)
Could any one advise me how I can moinitor water contamination so when it reahc certian level of contamination it will dischareg automatiocally. I would in line montioring .Can any one help me.
Regards
Onjal
I would like to monitor water in the bath tank so when it reach certain dirty contamination level it will dump by using automatic monitoring and dicharge valve open and discharge contaminated water and removal from tank (Bath)
Could any one advise me how I can moinitor water contamination so when it reahc certian level of contamination it will dischareg automatiocally. I would in line montioring .Can any one help me.
Regards
Onjal