Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Want to extract ascii file of results with coordinates in ansys structural

Status
Not open for further replies.
mechanicaljw

mechanicaljw

Structural
Joined
Jun 14, 2012
Messages
80
Location
DE
Hello everyone,

I''ve done an FEM simulation and i am trying to extract ascii results of say the von Mises stress along a specified line or axis. Can this be done in Ansys Structural (Workbench)?

Thanks for the help in advance!
Jimmy
 
Status
Not open for further replies.

Similar threads

S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
4K
struclearner
struclearner
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
Sparky4598
  • Locked
  • Question Question
Static structural structural error plot
Replies
0
Views
2K
Sparky4598
Sparky4598

Part and Inventory Search

Sponsor

Back
Top