Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wall Openings for conveyors

Status
Not open for further replies.

Ehendrix

Mechanical
Joined
Nov 23, 2015
Messages
63
Location
US
I have nearly completed a project and the Fire Marshall has asked does the wall openings need protection for conveyors connecting the new and old parts of the plant together. I am trying to locate if NFPA has anything particular about this other than room design requirement for openings but this doesn't apply to that.

Thanks,

Eric Hendrix, SET
NICET Certified
Design Manager
 
Correct I didn't find anything specifically to this as well but wanted to be sure. This is not an FM job.

Thanks buddy,

Eric Hendrix, SET
NICET Certified
Design Manager
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top