Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

View Section Naming

  • Thread starter Thread starter Mwessel
  • Start date Start date
M

Mwessel

Guest
I've been a UG/NX user for many years and I'm new to CREO. I have an assy with section views created in the models and they are something like "Xsec0001", when I open my drawing and I'm working section views, the naming of the Xsec0001 appears on the face of the drawing. Can I override and rename in the drawing? If so, how do I do it? Thanks
 
When creating the section, the "Xsec0001" is highlighted. Just type in what you want to call the section. If the section is already created, right click on the section and "rename" becomes available. Name the section what you want to see next to the section arrow. Call it "A", not A-A. Otherwise A-A will show up in the drawing next to each arrow.

I ran UG a long time ago and it's a different animal. A basic introduction to Creo class would probably be a good investment.
 

Part and Inventory Search

Sponsor

Back
Top