Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

VHP change of Concentration

Status
Not open for further replies.
Fenixseravgon

Fenixseravgon

Bioengineer
Joined
Jun 8, 2001
Messages
26
Location
MX
We have a VHP Isolator, where we use a HP 31%, but in the market there is no more HP of that concentration, only 35%.

Must we califiate again the process with this new HP concentration?
Must we change the recipe´s parameters?
Thanks in advance.

Sergio Ávila
 
Status
Not open for further replies.

Similar threads

BSMEclassof2012
  • Question Question
Premature Deterioration of Ozone Diffuser Gaskets – Request for Support
Replies
3
Views
4K
btrueblood
btrueblood
1946ladjal
  • Locked
  • Question Question
Trim Bed for adsorption of heavy aromatics
Replies
2
Views
2K
1946ladjal
1946ladjal
Vivaldi M. Smith
  • Locked
  • Question Question
High High trip of a natural draft Heater stack temperature
Replies
3
Views
2K
Vivaldi M. Smith
Vivaldi M. Smith
ritesh bindal
  • Locked
  • Question Question
Doubt in the represntation of the PID Controllers in P&ID diagram
Replies
1
Views
1K
Heaviside1925
Heaviside1925
yamoffathoo
  • Locked
  • Question Question
Does aeration of a vinyl acetate based emulsion containing carbon fibers reduce LDV?
Replies
3
Views
1K
yamoffathoo
yamoffathoo

Part and Inventory Search

Sponsor

Back
Top