ecampos
Mechanical
- Dec 21, 1999
- 97
Does anyone have any experience with using Vascomax 300 for gearing. If so what were the assumed allowables for the Contact and Bending stresses in the gears. AGMA does not cover this material and we are wondering how to go about implementing AGMA 2001-C95 and 908-B89 with materials other than which is described in the tables in these specs.
Any information or leads as to where to find this info would be appreciated.
Regards,
Edson Campos
Any information or leads as to where to find this info would be appreciated.
Regards,
Edson Campos