Jul 26, 2006 #1 pwrjetta Mechanical Jul 17, 2006 3 Hello all I was wondering if it is possible to declare variables in solid works 2006 like length=3.000 and then just type in length in the dimension field
Hello all I was wondering if it is possible to declare variables in solid works 2006 like length=3.000 and then just type in length in the dimension field
Jul 26, 2006 #2 Theophilus Mechanical Dec 4, 2002 3,407 Have you checked out design tables in Help? Jeff Mowry http://www.industrialdesignhaus.comReason trumps all. And awe trumps reason. Upvote 0 Downvote
Have you checked out design tables in Help? Jeff Mowry http://www.industrialdesignhaus.comReason trumps all. And awe trumps reason.
Jul 26, 2006 Thread starter #3 pwrjetta Mechanical Jul 17, 2006 3 I will check it out thanks Upvote 0 Downvote
Jul 26, 2006 #4 CorBlimeyLimey Mechanical Nov 5, 2003 15,292 Also check global variables or equations > global variables in the Help file. Helpful SW websites FAQ559-520 How to get answers to your SW questions FAQ559-1091 Upvote 0 Downvote
Also check global variables or equations > global variables in the Help file. Helpful SW websites FAQ559-520 How to get answers to your SW questions FAQ559-1091
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")