Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Variable Table Help 1

Status
Not open for further replies.

m4rc

Mechanical
Joined
Jan 25, 2005
Messages
112
Location
GB
Hi,

After reading this thread - it got me thinking about something that I could apply to my model. It should be easy, but I think I've still got jetlag and my brain is not working properly :(

So here goes...
I have a circular cutout who's diameter is based on the value of another value in the part. I'd like to be able to suppress/unsuppress the cutout using say 1/0 from within the variable table... is this possible?

Cheers,

M
 
Right Click on the feature in the Edgebar and choose Add Supression Variable. To see it in your variable table set the table filter to dipslay BOTH Dimensions and User Variables named by the user.
 
Cheers!

M
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top