Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Variable Section Sweeps (Wildfire 2.0)

  • Thread starter Thread starter hornj
  • Start date Start date
H

hornj

Guest
I
 
Var sec sweep: The first trajectory (Origin) is controlling the "length". So it will go from start to end of that.


The other trajectories have to be at least long enough in both ends.
 
You must log in or register to reply here.

Similar threads

ZStrick
  • Locked
  • Question Question
Creo 3 Variable Rib Heights
Replies
1
Views
1K
3DDave
3DDave
looslib
  • Locked
  • Question Question
Y14.3 Section lining
Replies
4
Views
518
looslib
looslib
A
variable section sweep
Replies
0
Views
3K
abdali128
A
Francis700
  • Locked
  • Question Question
Creo: Model Section Outline vs Drawing Text Colour - "Letter"
Replies
1
Views
590
DesEng1986
DesEng1986
J
Pro-E Wildfire 4.0 Programming assistance needed !!
Replies
0
Views
3K
Joe Pie
J

Part and Inventory Search

Sponsor

Back
Top