Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Valve trim for steam tracing 1
- Thread starter Robys
- Start date
-
1
- #2
For the most part Trim 1 is not usually in standard valves anymore. From my experience the only people using Trim 1 are nuclear power plants trying to reduce Cobalt in the system.
Trim 8 is used on most class 150 through 600 valves and Trim 5 for class 900 and above.
Trim 8 is used on most class 150 through 600 valves and Trim 5 for class 900 and above.
- Status
Similar threads
