Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Valve fittings/color codes

Status
Not open for further replies.
ccaserta

ccaserta

Specifier/Regulator
Joined
Feb 21, 2002
Messages
105
Location
US
I'm currently looking at some industrial machinery going to Europe. It uses gas such as oxygen and others for a heating process. Is there a standard that specifies color codes for connections of the pipes and fittings so that confusion does not arise with flexible piping connections ?

Christopher Caserta
ccaserta@us.tuv.com
Ph:904-225-0360
 
Status
Not open for further replies.

Similar threads

A
  • Question Question
Use of Gate Valve for Throttling
Replies
9
Views
7K
ASA2025
A
trentar
  • Question Question
example of 12516 valve design calculations
Replies
0
Views
8K
trentar
trentar
35jacob35
  • Locked
  • Question Question
Valve Paint Aplication
Replies
3
Views
3K
SJones
SJones
neroverdi41
  • Locked
  • Question Question
Pressure Control Valve vs Flow Control Valve
Replies
11
Views
6K
Taicho567
Taicho567
neroverdi41
  • Question Question
Control Valve CFD Analysis
Replies
11
Views
9K
neroverdi41
neroverdi41

Part and Inventory Search

Sponsor

Back
Top